Voron 350 Custom Build Plate (Garolite, G10, G11, Carbon Fiber)
Made by Voron
$69.99
Sign in to save your cart and view your orders.
Shipping is selected during checkout.
USA MADE RIGID steel build plates cut perfectly for your Voron 3D printer. It is the same shape as the build plate included with your Voron 3D printer so it is a perfect drop on replacement. The extra thick steel plate will not curl up off the bed or even warp the slightest bit. This is a must for large difficult prints. It is ready to accept your choice of adhesion.
These build plates were developed for our sister company that does service bureau and production FDM printing for industrial customers. Printing over 300kg of filament a year we have developed some of the best build plates you can get for your Voron 3D printer.
All the options below come pre-applied to a spring/rigid steel sheet. All plates should be cleaned with dish soap, water rinse, and paper towel dry. IPA will work but can leave a residue behind that affects adhesion. Dish soap is the best. Use the filament manufacturer's recommended bed temperature for a good starting point.
Build surface options
Carbon Fiber
Similar to the G10 with SS plate except stiffer but still allowing some degree of flex to release. We use real authentic twill carbon fiber for its stiffness, durability, and high temperature resistance. Thickness ranges between 0.5mm to 2mm (.020"-.080") and depends on what we have in stock. This is not an effects plate, it will NOT transfer a micro texture to your print. You can expect a very smooth surface. Works great with PETG and PETG-CF. Works with ASA but will require Vision Miner's Nano Polymer Adhesive and will self release clean once cool.
Rigid G10 Garolite
Standard 1/64" G10 laminated to a thick steel plate. The plate is rigid and will not flex. Best suited for high warp parts that can curl a spring steel plate like a potato chip. Depending on the material; parts can be removed with little effort once the plate has cooled to room temperature. Works with ASA but will require Vision Miner's Nano Polymer Adhesive and will self release clean once cool.
Rigid G11 Garolite
Standard 1/32" G11 laminated to a thick steel plate. The plate is rigid and will not flex. Best suited for high warp parts that can curl a spring steel plate like a potato chip. Depending on the material; parts can be removed with little effort once the plate has cooled to room temperature.
Garolite
This 1/32" thick topper is primarily used for Nylon. It offers the best adhesion and reusability. Use your build plate again and again to print any type of nylon and nylon blends such as glass fiber and carbon filled. It can also be lightly sanded to yield even greater adhesion. We recommend using this with Elmer's Purple Glue Stick. If you print with nylon a lot, then you absolutely need this.
Polypropylene
Works well for printing PP with no adhesion glue. Has a very strong hold! High warping prints will pull the build plate up before it becomes detached from the surface. Therefore glue should be used on parts that have a large first layer. Large surface areas can become hard to remove and therefore the glue acts like a release agent. Magigoo PP is a good product to use with this surface.
Choose the steel and surface combination above that fits your printer, filament and application. Price and availability update with the selected configuration.